Automation Components (ACI) | Part Number: A1KNIA24GD

The A/1K-NI-A-24'-GD of ACI is a 24 foot, 1K ohm averaging temperature sensor @ 70°F. The standard plastic box-bendable copper averaging configuration has a mounting flange for quick installation and a foam pad to dampen vibrations. A continuous element provides an averaged signal which encompasses the full length of the copper tube.

Ships in 4-6 weeks
  • Provides a predictable and accurate output over the specified temperature range
  • Each sensor configuration is designed and manufactured for long-term quality and performance
  • Double encapsulation and etched Teflon leads

A/1K-NI-A-24'-GD Technical Data

Sensor Type and Sensor Curve
Nickel RTD, PTC (Positive Temperature Coe client)

Number Sensing Points

Number Wires
Two (Non-Polarity Sensitive)

Sensor Output @ 21.1C (70F)
1000 Ohms nominal

Sensor Accuracy
+/- 0.41C (+/- 0.74F) @ 21.1C (70F)

Din Standard and Temperature Coefficient (0-100C)
Din 43760 | 6370 ppm/C

Sensor Stability
+/- 0.05% after 1000 Hours @ 150C (302F)

Self-Heating and Maximum Operating Current
0.3C/mW (Still Air) | 5 mA

Response Time (63% Step Change)
8 Seconds nominal

Galvanized Steel, -40 to 115C (-40 to 239F), NEMA 1 (IP10)

Storage Temperature Range
-40 to 85C (-40 to 185F)

Operating Humidity Range
10 to 95% RH, non-condensing

Sensing Element Material, Element Diameter
Copper, 0.210" (5.34mm) nominal

Fitting Material and Flammability Rating
Polyamide 66 (High Performance Nylon), UL94-HB

Foam Pad Material and Flammability Rating
Neoprene/EPDM/SBR Polymer, UL94-HBF; FMVSS-302; MIL-R-6130C

Lead Length and Conductor Size
12" (30.5cm), 22 AWG (0.65mm)

Lead Wire Insulation, Wire Rating
Etched Teflon (PTFE) Colored Leads, Mil Spec 16878/4 Type E)

Conductor Material
Silver Plated Copper