Automation Components (ACI) | Part Number: AANDO8

The A/AN-DO-8" is a duct without box type III thermistor of 10K ohm@ 77°F (25°C). The standard duct without box configuration has a mounting flange for quick installation and etched-Teflon leads. The sensing element is double encapsulated to avoid sensor failures caused by moisture infiltration. Additional options include: plenum rated cable and quick connects for direct termination to male VAV-Controller inputs.

Ships in 4-6 weeks
  • Provides a predictable and accurate output over the specified temperature range
  • Each sensor configuration is designed and manufactured for long-term quality and performance
  • Double encapsulation and etched Teflon leads

A/AN-DO-8" Technical Data

Sensor Type and Sensor Curve
Thermistor, Non-Linear, NTC (Negative Temperature Coefficient)

Number Sensing Points and Number Wires
One, Two (Non-Polarity Sensitive)

Sensor Output @ 25 C (77 F)
10 K ohm Type lll

Sensor Accuracy
+/-0.20 C (+/-0.36 F)

Power Dissipation Constant
3 mW/C

Sensor Dependent; Contact ACI for more information onspecific sensor

Response Time
10 Seconds nominal

Operating Temperature Range
40 to 115 C (-40 to 239 F)

Storage Temperature Range
-40 to 85C (-40 to 185F)

Operating Humidity Range
10 to 95% RH, non-condensing

Probe Material and Probe Diameter
304 Stainless Steel, 0.250" (6.35mm)

Fitting Material and Flammability Rating
Polyamide 66 (High Performance Nylon), UL94-HB

Foam Pad Material and Flammability Rating
Neoprene/EPDM/SBR Polymer, UL94-HBF; FMVSS-302; MIL-R-6130C

Lead Length and Conductor Size
14" (30.5cm), 22 AWG (0.65mm)

Lead Wire Insulation, Wire Rating
Etched Teflon (PTFE) Colored Leads, Mil Spec 16878/4 Type E)

Conductor Material
Silver Plated Copper