AFP

Analog Output
ACI | Part Number: AFP
$5.80
The AFP allows an analog (voltage or current) signal to control a floating point actuator. It converts an analog signal into two relay contact outputs (one increase/one decrease).
Ships in 4-6 weeks
The isolated floating point output can be controlled by any one of nine analog input signal ranges (using an offset jumper). Upon power-up, the decrease relay will drive 100% of the chosen timing range to ensure that the output is at its minimum position.

AFP Technical Data

Supply Voltage
24 VAC or 24 VDC, (+/- 10%), 50/60 Hz

Supply Current
105 mA maximum without 24 VDC auxiliary output
190 mA maximum with 24 VDC auxiliary output

Input Voltage Signal Range
0-5 VDC, 0-10 VDC, 0-15 VDC

Input Current Signal Range
0-20 mA

Analog Voltage Signal Input Range with Offset Jumper
1-5 VDC, 2-10 VDC, 3-15 VDC

Analog Current Signal Input Range with Offset Jumper
4-20 mA

Input Impedances (Nominal)
Voltage @ 10,000 ohm Nominal / Current @ 250 ohm nominal

Output (Floating Point)
Two relay contact outputs (Increase / Decrease)

Relay Contact Rating
Dry Contact, Form C, 2A maximum @ 24 VDC

Relay Electrical Life
100,000 operations minimum

Relay Mechanical Life
1,000,000 operation

Connections
90 degrees Pluggable Screw Terminal Blocks

Wire Size
16 to 26 AWG

Terminal Block Torque Rating
0.5 Nm (Minimum); 0.6 Nm (Maximum)

Operating Temperature Range
35 to 120F (1.7 to 48.9C)

Storage Temperature
-20 to 150F (-28.9 to 65.5C)

Snaptrack Material
Polyvinyl Chloride (PVC)

Operating Humidity Range
10 to 100% RH, non-condensing

Snaptrack Flammability Rating
UL94 V-0

Product Dimensions
(L) 4.00" (W) 3.25" (H) 1.15" (101.6 x 82.55 x 29.21 mm)