Images are representational. Actual product may vary slightly from this image.

EASYIO-FG-20+

Controller
EasyIO | Part Number: EasyIOFG20+
FG+, an improved FG performance option, with SD Card built-in in new holder, 400 MHz Main Processor, 20 Point Sedona Controller, 12x UI, 6 x UO (200mA sink) and 2 x DO, with built in HTML 5 Graphics Server. SD Card Memory expansion, 2 RS 485 ports and full EasyIO Sedona Library for Logging, Control, Scheduling and remote management
Ships in 4-6 weeks
Back
Powerful internet ready field controller with two ARM processors. With many built in I/O and a huge data logging capacity can be used for a variety of different applications. Can connect to the internet without the need of gateway or server.
Back

EasyIO-FG-20+ Technical Data

Power Supply
24V AC +/- 5% or 24V DC +20%/-15%

Consumption
18VA

Current Rating
750mA at 24VAC/VDC

Operating temp
0 to 65 °C (32 to 150 °F)

Storage temp
-20 to 65 °C (-4 to 150 °F)

Operating humidity
10% to 95% relative humidity non-condensing

Dimensions
215 x 125 x 44 mm (L x W x H)

Material
UL Approved Plastic

Universal Input
12xUI
5 modes:
Digital mode: voltage free contact input.
Resistance mode: input range 500-500 KOhm.
Voltage mode: input range 0-10V
Current mode: input range 0-20mA
Pulse count mode: maximum pulse frequency: 20Hz

Digital output
2xDO (with LED’s for status)
Relay output with contact rating 1A 30VDC

Universal Output
6xUO
3 modes:
Voltage mode: output range 0-10V
Current mode: output range 0-20mA
Digital mode: maximum sinking current 200mA

Physical Interface 1 &2 (Port 1 & 2)
EIA-485 (BUS A,B) Two-wire, (Port 1 & 2) Half Duplex

Modbus Baud Rate
Speed: (9.6K, 19.2k, 38.4K, 76.8K)
Data Bit: (8 bits), Parity: (None)

Ethernet Support
IP, TCP, UDP, ICMP, HTTP, FTP

Application Support
Sox, TCOM driver, Modbus, BACnet

Back
Datasheet_EASYIO-FG-20+.pdf
Datasheet_EASYIO-FG-20+.pdf
See MoreSee Less