Images are representational. Actual product may vary slightly from this image.

EASYIO-FG-32+

Controller
EasyIO | Part Number: EASYIOFG32+
FG+, an improved FG performance option, with SD Card built-in in new holder, 400 MHz Main Processor, 32 Point Sedona Controller, 8 UO, 16 UI, 8 DO, with built in HTML 5 Graphics Server. SD Card Memory expansion, 2 RS 485 ports and full EasyIO Sedona Library for Logging, Control, Scheduling and remote management
Ships in 4-6 weeks
Back
Powerful internet ready field controller with two ARM processors. With many built in I/O and a huge data logging capacity can be used for a variety of different applications. Can connect to the internet without the need of gateway or server. More built-in I/O then the FG 20 controllers.
Back

EasyIO-FG-32+ Technical Data

Power Supply
24V AC +/- 5% or 24V DC +20%/-15%

Consumption
18VA

Current Rating
750mA at 24VAC/VDC

Operating temp
0 to 65 °C (32 to 150 °F)

Storage temp
-20 to 65 °C (-4 to 150 °F)

Operating humidity
10% to 95% relative humidity non-condensing

Dimensions
233 x 124 x 44 mm (9,2 x 4,9 x 1,7 inch)

Material
UL Approved Plastic

Universal Input
16xUI
5 modes:
Digital mode: voltage free contact input.
Resistance mode: input range 500-500 KOhm.
Voltage mode: input range 0-10V
Current mode: input range 0-20mA
Pulse count mode: maximum pulse frequency: 20Hz

Digital output
8xDO (with LED’s for status)
Relay output with contact rating 1A 30VDC

Universal Output
8xUO
3 modes:
Voltage mode: output range 0-10V
Current mode: output range 0-20mA
Digital mode: maximum sinking current 200mA

Physical Interface 1 &2 (Port 1 & 2)
EIA-485 (BUS A,B) Two-wire, Half Duplex

Modbus Baud Rate
Speed:(9.6K, 19.2k, 38.4K, 57.6K, 115.2K bit/s), Data Bit: (8 bits),
Parity: (None, Even, Odd)

BACnet Baud Rate
Speed: (9.6K, 19.2k, 38.4K)
Data Bit: (8 bits), Parity: (None)

Ethernet Support
IP, TCP, UDP, ICMP, HTTP, FTP

Application Support
Sox, TCOM driver, Modbus, BACnet

Back
Datasheet_EASYIO-FG-32+.pdf
Datasheet_EASYIO-FG-32+.pdf
See MoreSee Less