Images are representational. Actual product may vary slightly from this image.

ECY-S1000-28

Controller
Distech Controls | Part Number: CDIYS102800
Connected System Controller Control, Automation and Connectivity Server with support of up to 28 I/O points and 3 Modbus devices.
Ships in 4-6 weeks
Back
Is a modular and scalable platform used to control a wide range of HVAC applications. It supports multi-protocol communications, including BACnet/IP, and is a listed BACnet Building Controller. Can be connected through either Ethernet cables or Wi-Fi. Supports Distech Controls’ EC-gfxProgram, which makes Building Automation System (BAS) programming effortless.
Back

ECY-S1000-28 Technical Data

Voltage
18VDC

Power Consumption
8.9W; external loads excluded

Ethernet Connection Speed
10/100 Mbps

Addressing
IPv4 or Hostname

BACnet Profile
BACnet Building Controller (B-BC)), AMEV AS-A and AS-B (pending)

BACnet Listing
BTL, WSP B-BC

BACnet Interconnectivity
BBMD forwarding capabilities
BACnet/IP to BACnet MS/TP routing

BACnet Transport Layer
IP & MS/TP (optional)

Web Server Protocol
HTML5

Web Server Application Interface
REST API

Supported BACnet MS/TP and Modbus RTU and TCP Connectivity
1 × RS-485 serial communications ports
Each RS-485 port supports one communication protocol at a time
RS-485 Wiring 1-pair + Common/shield
RS-485 EOL Resistor Built-in
RS-485 Baud Rates 9600, 19 200, 38 400, or 76 800 bps
RS-485 Addressing Controller’s Web Configuration Interface
Modbus TCP Devices must be on the same subnet

Wireless Adapter
Optional, USB Port Connection

Wi-Fi Communication Protocol
IEEE 802.11b/g/n and 802.11s

Wi-Fi Network Types
Client, Access Point, Hotspot

Maximum number of standard devices supported per controller combined
12

Processor
Sitara ARM processor

CPU Speed
1GHz

Memory
4GB Non-volatile Flash (applications & storage)
512MB RAM

Real Time Clock (RTC)
Real Time Clock with rechargeable battery
Supports SNTP network time synchronization

RTC Battery
20 hours charge time, 20 days discharge time
Up to 500 charge / discharge cycles

Cryptographic Module
FIPS 140-2 Level 1 Compliant

Communications Ports
2 switched RJ-45 Ethernet ports
BACnet/IP, Modbus TCP, NTP, and REST
2 × USB 2.0 Ports
1 × Micro-USB 2.0 Ports
RS-485 Serial Communications Screw terminals
Supported Protocols BACnet MS/TP or Modbus RTU
Subnet RJ-45

Environmental
Operating Temperature 32°F to 122°F (0°C to 50°C)
Storage Temperature -22°F to 158°F (-30°C to +70°C)
Relative Humidity 0 to 90% Non-condensing
Ingress Protection Rating IP20
Nema rating 1

Back
ECY-CSC_DATA_SHEET.pdf
See MoreSee Less