EasyIO-FW-8V

WiFi Controller
EasyIO | Part Number: EasyIOFW8V
Same as FW-8. Includes a built-in Pressure Pick-up Sensor for Air Flow Measurement used in VAV applications.
Ships in 1 business day
High performance and freely programmable wireless Wi-Fi controller. Will save on labor and wiring. Has BACnet Ip server / client, BACnet MSTP client (combination of BACnet MSTP client and BACnet IP client up to five devices total) and two Ethernet ports for daisy chain connection wiring. Includes a built-in pressure pick-up sensor for air flow measurement used in VAV applications.

EasyIO-FW-8V Technical Data

Power Supply
24V AC +/- 5% or 24V DC +20%/-15%

Consumption
500mA

Operating temp
0 to 65 °C (32 to 150 °F)

Storage temp
-20 to 65 °C (-4 to 150 °F)

Operating humidity
10% to 70% relative humidity non-condensing

Dimensions
136 x 104 x 44 mm (L x W x H)

Material
UL Approved Plastic

Universal Input
4xUI
12-Bit ADC (with PGA)
Voltage: 0 ~ 10V DC (+/- 0,05V)
Resistance input: 500 ohms to 500K ohms (+/-10 Ohm)
Thermistor Sensor: 10K, 10K Shunt, 20K, 1K Balco, 1K Platinum: All (+/- 0.1 ºC)
UI as DI: Voltage Free Contact

Analog Output
4xAO
12-Bit DAC
Voltage: 0~10V, Min Impedance 10k Ohm

Differential Pressure
Operating range: 0~500 Pa

Sensor
0.0 ~ 2.0 inches per water
Data Update Rate: 50ms
Span accuracy: 4.5% of reading

Physical Interface 1(Port 1)
EIA-485 Two-wire, Half Duplex

BACnet Baud Rate
Speed: (9.6K, 19.2k, 38.4K), Data Bit: (8 bits), Parity: (None)

WiFi
WIFI (802.11b/g/n)

Ethernet
2 Ethernet Ports 10/100M

Ethernet/WiFi Support
IP, TCP, UDP, ICMP, HTTP, FTP

Application Support
Sedona, BACnet MSTP Client, BACnet IP Server/Client and Tcom