JC F-1211

Turbine Flow Meter
Johnson Controls | Part Number: F1211
Insertion turbine flow meters are suitable for measuring electrically conductive water-based liquids. Provides isolated 4-20 mA and 0-10 V isolated analog output signals that are linear with the flow rate.
Ships in 4-6 weeks
Patented electronic sensing is resistant to scale and particulate matter. Custom calibrated, highly accurate instrumentation at very competitive prices. Allows for insertion and removal by hand without system shutdown.

F-1211 Technical Data

+/- 0.5% of reading at calibrated velocity
+/- 1% of reading from 3 to 30 ft/s (10:1 range)
+/- 2% of reading from 0.4 to 20 ft/s (50:1 range)

Sensing Method
Electronic impedance sensing (non-magnetic and non-photoelectric)

Pipe Size Range
2 1/2” through 72” nominal diameter

Supply Voltage
24 +/- 4 V AC/DC at 80 mA

Liquid Temperature Range
Standard: 180 F continuous, 200 F peak
High Temp: 280 F continuous, 300 F peak
Meters operating above 250 F require 316 SS construction option

Ambient Temperature Range
-5 to 160 F (-20 to 70 C)

Operating Pressure
400 PSI maximum

Pressure Drop
Less than 1 PSI at 20 ft/s in 2½” pipe, decreasing in larger pipes and lower velocities

Output Signals Provided
Analog Outputs (Isolated) Jumper selectable: 4-20 mA / 0-10V / 0-5V
Frequency Output 0 – 15 V peak pulse

Electroless nickel plated brass

Electronics Enclosure
Weathertight aluminum enclosure

Electrical Connections
4-wire recommended for analog output
10’ of cable with ½” NPT conduit connection