10-Point General Purpose Programmable Controller with 2 UI, 1 BI, 3 BO, and 4 CO; 24 VAC; FC and SA Bus Support; Integral Display with Push Button User Interface
Ships in 1 business day
Can be combined with FX-PCX for an expansion of the number of I/O. Support BACnet and N2 field bus networking. State-Based Application Control Logic with Adaptive, Automatically Tuned Control Loops - Prevents simultaneous heating and cooling, reduces commissioning time, eliminates change-of-season re-commissioning, and reduces wear and tear on mechanical devices.

FX-PCG1621-1 Technical Data

Supply Voltage
24 VAC (nominal, 20 VAC minimum/30 VAC maximum)
50/60 Hz
Power Supply Class 2 (North America)

Power Consumption
20 VA maximum for FX-PCG1621 and FX-PCG2621 (with integral display)

Ambient Conditions
Operating: 0 to 50°C (32 to 122°F); 10 to 90% RH noncondensing; Pollution Degree 2
Storage: -40 to 80°C (-40 to 176°F); 5 to 95% RH noncondensing

Controller Addressing
DIP switch set: valid field controller device addresses 4-127 (device addresses 0–3 and 128–255 are reserved)

Communications Bus
3-wire FC Bus between the supervisory controller and FX-PC controllers
4-wire SA Bus between FX-PC controller, NS Series Network Sensors, and other sensor/actuator devices, includes a lead to source 15 VDC supply power (from FX-PC controller) to bus devices.

H8SX/166xR Renesas microcontroller

1 MB Flash Memory and 512 KB Random Access Memory (RAM)

Input and Output Capabilities
2 - Universal Inputs: Defined as 0–10 VDC, 4–20 mA, 0-600k ohms, or Binary Dry Contact
1 - Binary Inputs: Defined as Dry Contact Maintained or Pulse Counter/Accumulator Mode
3 - Binary Outputs: Defined as 24 VAC Triac (selectable internal or external source power)
4 - Configurable Outputs: Defined as 0–10 VDC or 24 VAC Triac BO

Analog Input/Analog Output Resolution and Accuracy
Analog Input: 16-bit resolution
Analog Output: 16-bit resolution and ±200 mV in 0–10 VDC applications

Input/Output: Fixed Screw Terminal Blocks
FC Bus, SA Bus and Supply Power: 3-wire and 4-wire Pluggable Screw Terminal Blocks
FC Bus and SA Bus Port: RJ-12 6-pin Modular Jacks

Horizontal on single 35 mm DIN rain mount (preferred), or screw mount on flat surface with three integral mounting clips on controller

Enclosure material: ABS and polycarbonate UL94 5VB; self-extinguishing; Plenum-rated Protection Class: IP20 (IEC529)

150 x 164 x 53 mm (5-7/8 x 6-7/16 x 2-1/8 in.) including terminals and mounting clips