Images are representational. Actual product may vary slightly from this image.
JOHNSON CONTROLS | Part Number: FXPCV16260
24 VAC (nominal, 20 VAC minimum/30 VAC maximum)
Power Supply Class 2 (North America)
10 VA typical, 14 VA maximum
Operating: 0 to 50°C (32 to 122°F); 10 to 90% RH noncondensing; Pollution Degree 2
Storage: -40 to 70°C (-40 to 158°F); 5 to 95% RH noncondensing
BACnet/MSTP: DIP switch set; valid controller device addresses 4–127
N2: DIP switch set; valid controller device addresses 1–255
3-wire FC Bus between the supervisory controller and FX-PC controllers
4-wire SA Bus between FX-PC controller, NS Series Network Sensors, and other sensor/actuator devices, includes a lead to source 15 VDC supply power (from FX-PC controller) to bus devices
Analog Input/Analog Output Accuracy
Analog Input: 15-bit resolution on UIs
Analog Output: 0–10 VDC ± 200 mV
RX630 32-bit Renesas microcontroller
1 MB Flash Memory and 512 KB Random Access Memory (RAM)
Air Pressure Differential Sensor
Range: -1.5 in. to 1.5 in. W.C.
Accuracy: ±0.75% Full Span Maximum (±0.0225 in. W.C.)
Typical accuracy at zero (null) pressure is ±0.003 in. W.C.
Mounts to damper shaft using single set screw and to duct with single mounting screw
4 N•m (35 lb•in.) minimum shaft length = 44 mm (1-3/4 in.)
(Height x Width x Depth): 165 x 125 x 73 mm (6.5 x 4.92 x 2.9 in.)
Center of Output Hub to Center of Captive Spacer: 135 mm (5-5/16 in.)