JC TE-68NT-1N00S

Temperature Sensor
Johnson Controls | Part Number: TE68NT1N00S
Temperature sensor for wall application. Comes with 1000K ohms nickel sensor, warmer/cooler temperature setpoint and terminal block connection.
Ships in 4-6 weeks
A warmer/cooler dial is included on certain models for minor temperature adjustments from the setpoint. All sensors have DIP switches that enable or disable unit functions.


Nickel Sensor
Temperature Sensor 1,000 ohm thin-film nickel
Temperature Coefficient Approximately 3 ohm per F (5.4 ohm per C)
Reference Resistance 1,000 ohm at 70F (21C)
Accuracy +/- 0.34F at 70F (+/- 0.18C at 21 C)

Range Warmer/Cooler
Resistance 1500 Ohms

Sensor Response Time
10 minutes at 10 feet per minute

Field Connections
Modular Jack 8-position modular jack connector
Terminal Block Screw type terminals for 18 to 24 AWG wire

Zone Bus Access
6-pin connector with front bottom access for a laptop with HVAC PRO software and CVTPRO converter

Manual Override
Integral momentary pushbutton (DIP switch selectable)

LED Light
Green LED light indicates two modes of operation (VMA1200 and VMA1400 Series controllers only)

Ambient Operating Conditions
32 to 131F (0 to 55C)
10 to 95% RH, noncondensing; 86F (30C) maximum dew point

Ambient Storage Conditions
-40 to 140F (-40 to 55C)
5 to 95% RH, noncondensing; 85F (29C) maximum dew point

White thermoplastic

Dimensions (H x W x D)
3-1/4 x 3-1/4 x 1-7/16 in. (80 x 80 x 36 mm)