TEC3310-00-000

Thermostat Controller
Johnson Controls | Part Number: TEC331000000
Thermostat controller with stand-alone communication and on/off or floating fan coil and zoning control output.
Ships in 4-6 weeks
Two configurable binary inputs and usb port configuration. Backlit LCD touchscreen. Mobile gateway that allows user to control conditions via a mobile device.

TEC3310-00-000 Technical Data

Power requirements
19 to 30 VAC, 50/60 Hz, 4 VA at 24 VAC nominal, Class 2 or safety extra-low voltage (SELV)

Relay Contact Rating
19 to 30 VAC, 1.0 A maximum, 15 mA minimum, 3.0 A in-rush, Class 2 or SELV

Fan Relay Output Rating
19 to 30 VAC, 1.0 A maximum, 15 mA minimum, 3.0 A in-rush

Auxiliary Output Rating/Triac Output
19 to 30 VAC, 1.0 A maximum, 15 mA minimum, 3.0 A in-rush

Binary Inputs
Dry contact across terminal COM to terminals BI1, BI2, or COS

Analog Inputs
Nickel, platinum, A99B, 2.25k ohm negative temperature coefficient (NTC), 10k ohm NTC, 10k ohm NTC Type 3 across terminal COM to terminals R SEN or COS

Wire Size
18 AWG (1.0 mm diameter) maximum, 22 AWG (0.6 mm diameter) recommended

MS/TP Network Guidelines
Up to 100 devices maximum per Network Automation Engine (NAE);
4,000 ft (1,219 m) maximum cable length

Temperature Range
Backlit Display: -40.0 F/-40.0 C to 122.0 F/50.0 C in 0.5 Increments
Heating Control 40.0 F/4.5 C to 90.0 F/32.0 C
Cooling Control 54.0 F/12.0 C to 100.0 F/38.0 C

Temperature Accuracy
±0.9 F/±0.5 C at 70.0 F/21.0 C Typical Calibrated

Temperature Sensor Type
Local 1k ohm platinum sensor

Temperature Accuracy
±0.9 F/±0.5 C at 70.0 F/21.0 C typical calibrated

Minimum Deadband
2 F/1 C between heating and cooling

Occupancy Sensor Motion Detection
Minimum of 94 angular degrees up to a distance of 15 ft (4.6 m); based on a clear line of sight

Ambient Conditions
Operating:32 to 122°F (0 to 50°C); 95% RH maximum, noncondensing
Storage: -22 to 122°F (-30 to 50°C); 95% RH maximum, noncondensing