GC5 | Part Number: iSMABAAC20
Sedona Advanced Application Controller with 8UI, 4DI, 4DO, 4/6 AO, 1x1wire, 1xRS485, 1xUSB, 2x IP without LCD
Ships in 1 business day
Advanced control device for HVAC systems and building automation that allows for easy and quick real time programming. Built in RS485 allows for the expansion of the number of I/O by using the mix and mini series.

iSMA-B-8I-IP Technical Data

Universal Inputs (8UI)
All universal inputs have 16-bit resolution which support the following types of inputs:
-Temperature input support the following types of sensors: 10K3A1, 10K4A1, Carel 10K, 20K6A1, 2.2K3A1, 3K3A1, 30K6A1, SIE1, TAC1, SAT1, Pt1000, Ni1000
For sensor Pt1000 and Ni1000 use only 16-bit resolution
Voltage input 0-10 V DC: input resistance 100 k? accuracy ±0,1% measurement resolution 3 mV @ 12-bit and 1 mV @ 16-bit
Current input 0-20 mA (external resistor 499 ? required)
Resistive input 0-1000 k?: measurement resolution for 20 k? load 20 ? @ 12-bit and 1 ? @ 16-bit
Dry contact input

4x Digital Inputs (4DI)
Dry contact inputs
Fast pulse counter up to 100 Hz save in EEPROM memory

4/6x Analog Outputs (4/6AO)
All analog outputs are equipped with 12-bit ADC provides 10 mV resolution and accuracy less than ±0,5%. They support the following output types:
-Output: 0-10 V DC maximum load up to 20 mA (AO6- 5 mA)
-PWM: 0,01 Hz, 0,1 Hz, 1 Hz, 10 Hz, 100 Hz
AO5 and AO6 can only be used if 1-wire port is not in use, please notice for AO6 maximum current load is up to 5 mA.

4x Digital Outputs (4DO)
Relay output (NO): max. 3 A, 230 V AC/30 V DC

ARM Cortex-M4 204 MHz
ARM Cortex – M0 2014 MHz

Interface RS485 half-duplex
2x Ethernet with built-in switch (DHCP, Auto IP)
Baud rate: 2400 to 115200 bps
DALI Interface: built-in power supply 130 mA (option)
M-Bus Interface: up to 20 devices (option)
1-Wire Interface
Micro SD card slot
USB Host Interface
Protocols: Modbus RTU/ASCII/IP, BACnet MSTP/IP, SOX, DALI, M-Bus, 1-Wire, oBIX

Power Supply
24v AC/DC

Dimension: 106x110x62 mm (4.18x4.34x2.44 in)
Construction: UL approved, self-extinguishing plastic (PC/ABS)
DIN rail mounting DIN (DIN EN 50022 norm)
Cooling: internal air circulation

Operating temperature: -10°C to 50°C (14°F to 122°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Relative humidity: 5% to 95%, no condensation
Ingress Protection Rating: IP40 – for indoor installation