Touchscreen Wall Panel
GC5 | Part Number: iSMABLPHC1
Wall panel with 2.3" LCD display, touch buttons for changing parameters, power supply 24 V AC - built in temperature, humidity and CO2 sensors.
Ships in 4-6 weeks
A small and nondescript wall mounted temperature sensor. Is supported by either Modbus RTU/ASCII or BACnet MSTP. Four function buttons and 2.3" LCD screen allows for easy use of the device. Comes with a built in humidity and CO2 monitor.

iSMA-B-HC-1Technical Data

Temperature Sensor:
Type: 10k NTC
Range: 0 – 50°C (32°F – 122°F)
Accuracy: +/- 0,5°C (0,9°F)
Resolution: +/- 0,1°C (0,18°F)

Humidity Sensor:
Range 0-100% RH
Accuracy: +/- 2% RH in range 20 – 80% RH
Resolution: +/- 1% RH

CO2 Sensor:
Method Non Dispersive Infrared (NDIR), gold plated optics, diffusion sampling (with Telaire’s Patented ABC Logic Self Calibrated Algorithm)
Range: 400 – 2000 ppm
Accuracy: +/- 30 ppm OR +/- 3% of reading
Stability: < 2% of FS over life of sensor (15 years typical)
Warm Up Time : < 2 minutes (operational); 10 minutes (maximum accuracy)
Calibration: ABC Logic Algorithm
Manual Calibration Interval: Not required

2x RJ12 terminal (RS485 half-duplex)
Baud rate: 2400 to 115200 bps
Protocols: Modbus, BACnet

ARM Cortex: M0+s

Dimension: 100x123x27 mm (3.9371x4.8426x1.063 in)
Construction: plastic, self-extinguishing (PC/ABS)
Wall mounting (standard electric box)
Cooling: internal air circulation

Operating temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: -40°C to 85°C (-40°F to 185°F)
Relative humidity: 5% to 95%, non-condensing
Ingress Protection Rating: IP20
For indoor installation

Power Supply
24 V AC/DC +/- 20%