A/AN-BC-D-8"-GD

Duct Sensor
Automation Components (ACI) | Part Number: AANBCD8GD
$12.05
The A/AN-BC D-12"-PB is a 8 inch, 5.238K ohm duct mount thermistor @ 77°F (25°C). The galvanized metal box-bendable copper averaging configuration has a mounting flange for quick installation and a foam pad to dampen vibrations. The copper capillary houses sensing elements which are wired in a series/parallel configuration to provide an averaged output.
Ships in 4-6 weeks
Back
  • Provides a predictable and accurate output over the specified temperature range
  • Each sensor configuration is designed and manufactured for long-term quality and performance
  • Double encapsulation and etched Teflon leads
Back

A/BC-D-8"-GD Technical Data

Sensor Type and Sensor Curve
Thermistor, Non-Linear, NTC (Negative Temperature Coefficient)

Number Sensing Points and Number Wires
One, Two (Non-Polarity Sensitive)

Sensor Output @ 25 C (77 F)
5.238K ohm nominal

Sensor Accuracy
+/-0.20 C (+/-0.36 F)

Power Dissipation Constant
3 mW/C

Stability
Sensor Dependent; Contact ACI for more information on specific sensor

Response Time
10 Seconds nominal

Sensor Operating Temperature Range
-40 C (-40 F) to 150 C (302 F)

Enclosure
Galvanized Steel, -40 to 115 C (-40 to 239 F), NEMA 1 (IP10)

Storage Temperature Range
-40 to 85C (-40 to 185F)

Operating Humidity Range
10 to 95% RH, non-condensing

Probe Material and Probe Diameter
304 Stainless Steel, 0.250" (6.35mm)

Fitting Material and Flammability Rating
Polyamide 66 (High Performance Nylon), UL94-HB

Foam Pad Material and Flammability Rating
Neoprene/EPDM/SBR Polymer, UL94-HBF; FMVSS-302; MIL-R-6130C

Lead Length and Conductor Size
12" (30.5cm), 22 AWG (0.65mm)

Lead Wire Insulation, Wire Rating
Etched Teflon (PTFE) Colored Leads, Mil Spec 16878/4 Type E)

Conductor Material
Silver Plated Copper

Back
Thermistors-Duct-ACI.pdf
See MoreSee Less