A/AN-D-8"-BB

Thermistor
Automation Components (ACI) | Part Number: AAND8BB
$19.41
The A/AN-D-8"-BB is a 8 inch, 10K ohm duct mount type III thermistor @ 77°F (25°C). The metal bell box (BB) configuration has a NEMA 3R rating and is designed for wet environments. This unit also includes a two-piece 304 stainless steel thermowell which has male 1/2 inch NPT threads. The wells are milled to tight tolerances so there is maximum temperature transfer and this eliminates the need for thermal grease.
Ships in 4-6 weeks
  • Provides a predictable and accurate output over the specified temperature range
  • Each sensor configuration is designed and manufactured for long-term quality and performance
  • Double encapsulation and etched Teflon leads

A/AN-D-8"-BB Technical Data

Sensor Type and Sensor Curve
Thermistor, Non-Linear, NTC (Negative Temperature Coefficient)

Number Sensing Points and Number Wires
One, Two (Non-Polarity Sensitive)

Sensor Output @ 25 C (77 F)
10 K ohm Type lll

Sensor Accuracy
+/-0.20 C (+/-0.36 F)

Power Dissipation Constant
3 mW/C

Stability
Sensor Dependent; Contact ACI for more information onspecific sensor

Response Time
10 Seconds nominal

Sensor Operating Temperature Range
-40 C (-40 F) to 150 C (302 F)

Enclosure
Aluminum, -40 to 121 C (-40 to 250 F), Plenum Rated, NEMA 3R

Storage Temperature Range
-40 to 85C (-40 to 185F)

Operating Humidity Range
10 to 95% RH, non-condensing

Probe Material and Probe Diameter
304 Stainless Steel, 0.250" (6.35mm)

Fitting Material and Flammability Rating
Polyamide 66 (High Performance Nylon), UL94-HB

Foam Pad Material and Flammability Rating
Neoprene/EPDM/SBR Polymer, UL94-HBF; FMVSS-302; MIL-R-6130C

Lead Length and Conductor Size
12" (30.5cm), 22 AWG (0.65mm)

Lead Wire Insulation, Wire Rating
Etched Teflon (PTFE) Colored Leads, Mil Spec 16878/4 Type E)

Conductor Material
Silver Plated Copper